LED display screen maintenance method Full color LED screen - knowledge

LED display screens, like traditional electronic products, not only need to pay attention to in the process of using method, still need to the maintenance of the display, to make the LED display big screen for longer service life. Full color LED display screen using problems increasing, on the one hand, the reason is because each manufacturer in order to control the production cost, mass production on the work of materials for the cuts, which LED to some product of a few parts caused by aging in advance; On the other hand, the reason is because the user does not properly use habit. The latter is more common, below small make up under the care of ten full color LED display screen. 1, maintain full color LED display screen using the environment humidity, don't let anything in the nature of moisture into your full-color LED display screen. With humidity, full-color display screens, electric, can lead to a full-color displays parts corrosion, which made it into a permanent damage. 2, to avoid potential problems, we can select the protection for passive and active safety, repeat the could harm the full-color display screen items away from the screen, and clean the screen also gently wipe as much as possible, to minimize the possibility of the damage. 3, full color LED display screen most close relationship with our customers, do a good job cleaning maintenance is very necessary. Long exposure to the outdoor environment in the wind, sunlight, dust and so on easy to dirty, for a period of time, must be a piece of dust on the screen, it needs cleaning in time to prevent the dust package surface effect the watch for a long time. 4, being stable power supply and grounding protection is good, the bad natural conditions, especially in strong thunder don't use under the weather. 5, screen it is forbidden to water in the body, such as iron powder easily conductive metal. LED display screen placed in low dust environment as far as possible, the dust will affect the display, at the same time the dust too much can cause damage to the circuit. If the water because of various reasons, please power off immediately and contact maintenance personnel, until the screen display board dry rear can use in the body. 6, the switch of LED display order: A: first, open the computer to run normally and then open the LED display screen. B: turn off the LED display screen, and then shut down the computer. 7 don't for a long time, played in full white, red, green, blue, etc all bright screen, so as not to cause too much electricity, the power cord fever is too large, LED lamp is damaged, affect the service life of the screen. Do not free disassembly, joining together the screen body. 8, advice, LED display screen time to rest more than 2 hours a day, in the rainy season LED large screen used more than once a week at least. Generally open screen at least once a month, lit for more than 2 hours. 9, the led display big screen can use alcohol to wipe the surface, or by the use of brush, vacuum cleaner dust, not directly with wet cloth to wipe. 10, the led display big screen need to regularly check whether the normal work, the line is damaged, if you don't work to change in time, the line has damage to timely repair or replacement. Led display screen internal wiring, amateurs banned touch, in order to avoid electric shock, or damaged lines. If there is a problem, ask professional personage to for maintenance.