What are the precautions for use LED display LED display - knowledge

We always hope to buy their own products can use longer. Many times we are in this way, such as our own mobile phone, if just buy certainly very like, always want to protect it well. If your phone cost is higher, that is even more so. When used in life we will try every way to protect, let's say you buy mobile phone protection shell, and also some protection measures are taken in charge, let their batteries will become more durable. Because of using the service life of electrical appliances is not very high, and often prone to condition, so we in the use of the time will be more careful. LED display, obviously the price not very low, so we will cherish when using. Because of the high price, we always feel damage a great pity. And if we are very careful when using, also increase service life. Now it's time to see what are the main items use LED display. First, the use of LED display, should first open a computer, then open the display. Because we know that the LED display screen there are two parts, one is computer, and a display is. But when we were in the open should be conducted in accordance with the order. Like when we use the LCD computer of his own house, we should open your computer host, then we will open the computer display. Are the same. Because computers at boot time, the resulting current is relatively large, may be LED display can not accept the current, and for a long time past, LED display will be damaged. And turn off the LED display is on the contrary, first turn off the screen, turn off the computer. That's why the two are the same, is to avoid when computer switch machine, LED display will be burn out, even if does not burn, also because the current is too big, and to display a certain loss. Second, must pay attention to when using LED display heat dissipation. Electrical appliances in use will have the same kinetic energy and heat. Most of the time these hot, all because of electrical appliances in the work. But these hot, most of them are related to a heat dissipation problem. If cooling is easy to solve, with electrical appliances will not is easy to burn out. As we know, electricity use electrical appliances inside, and many of the appliances are basically is burn out. We have not seen the big summer in hot weather, there will be outside of the stores open display. This time because of work hard to heat dissipation, so the heat dissipation is not very successful. In order to protect the LED display is not burn out, just can't open display. And we note that the LED display in the case of heat dissipation is bad, it is best not to work too long time, if the bulb is burnt out, most likely there is a fire. LED display, like most of the electrical appliances, with all electrical characteristics, when we were in use as well. Don't forget to use electric lightning protection problem, also don't ignore it heat dissipation problem, we can't always open when using the machine immediately after shutdown, and shut down after always begin to restart again, so for the wastage of the LED display is very big, before and after the interval of at least a few minutes. Shenzhen LED display manufacturer' Service hotline: 4008 368 - 386 】 Is a research and development production and sales of indoor-outdoor full-color LED display, LED large screen and stage LED color screen, etc. Products of large enterprises. http://www。 xccled。 cn/