Matters needing attention in using and maintaining LED display method LED display - knowledge

Is the same as that of the traditional electronic products, to make the LED electronic display screen for longer service life, not only need to pay attention to in the process of using method, still need to the maintenance was carried out on the screen. With the wide use of LED electronic display screen, which is associated with the use of a growing problem, the influence of various subjective and objective factors, resulting in a decrease of the life span of the LED electronic display screen, unable to normal display, black screen. Here are some of the LED electronic display using the matters needing attention and maintenance methods. Is the same as that of the traditional electronic products, to make the LED electronic display screen for longer service life, not only need to pay attention to in the process of using method, still need to the maintenance was carried out on the screen. With the wide use of LED electronic display screen, which is associated with the use of a growing problem, the influence of various subjective and objective factors, resulting in a decrease of the life span of the LED electronic display screen, unable to normal display, black screen. Here are some of the LED electronic display using the matters needing attention and maintenance methods. One, the main control computer the daily maintenance and maintenance of computer generally placed in the control room, to ensure the stability of the display screen broadcast and good display effect we should often carried out on the main control computer maintenance as follows: 1 to keep control of indoor environment clean, dust removal, and regularly on the computer and peripheral equipment for dust pollution computer keyboard, disk, monitors and host circuit boards and other important components, can cause major problems. 2 computer at work, will send out a lot of heat. If heat dissipation is not good, indoor temperature is too high, easy to cause the computer to crash, such as fault, long-term use can reduce the service life of main control computer, therefore, should pay attention to indoor ventilation. If the environment temperature is higher, As the hot summer months) , control room should be installed fan, conditional can be equipped with air conditioning, temperature should be kept at 10 ℃ ~ 35 ℃ °, relative humidity at 30% 80%, try to avoid computer work under high temperature and high humidity environment. 4 on a regular basis to test the computer hardware and peripheral accessories, such as graphics, sending card is loose, DVI line, RS232 serial port is loose or damaged, etc. , found that the problem should be ruled out; 5 on a regular basis for computer antivirus treatment, especially to the Internet should install antivirus software, dealing with playback software upgrade regularly, ensure broadcast for the latest software version. Second, the control part of change, change note 1 computer, control part of the power cord zero, fire cannot reverse connection, plug should be strictly in accordance with the original position. If there are any peripherals, connection to end, should test cases are charged. 2 the control devices such as mobile computing, should first check prior to power connection lines, control panel for the loose. 3 can't change the location of the communication lines, flat connection lines, length. If there are any short circuit, tripping, burn the 4 mobile line, the anomaly appeared such as smoking, should not be repeated electric test, should be timely find problems. Three, use software operating the note 1 backup software: WIN2003, WINXP, application, software installation procedures, database, etc. It is recommended to use the 'ghost' software, easy to operate. 2 master installation method, the original data recovery and backup. 3 master control parameters setting, basic data of preset modification. 4 skilled use the program, and editing operation. 5 to scan for viruses regularly, remove irrelevant data. To create each exciting scene!