After a lot of times we buy led display because some factors lead to can't immediately installation, this case will need to be very good to hoard led display.
And LED display as a kind of precision electronic products, have high demands on storage and environment, carelessly may be LED display damaged as a result, today we stand on the LED display manufacturers said professional point of view of how to properly store LED display.
Storage LED display need to pay attention to the eight o 'clock: 1, the box body to put the location of the need to clean up after use pearl cotton.
2, LED display, prohibit disorderly pile module or stack more than ten.
Stack module, light surface relative to put in place to isolate and use pearl cotton.
3, placement of LED display cabinet, suggested that lights up flat, such as too many need to be especially careful when standing protection, larger sites on vertical vibration.
4, display cabinet to should take put down gently, landing back on lamp surface ground again, beware of the ke.
5, all the staff during installation or maintenance, must take cordless antistatic bracelet.
6, LED display installation using esd bracelet 7, when transporting box shall be raised, shall not be pushed or dragged on the ground, so as to avoid uneven ground module at the bottom of the damage.
Enclosure should keep balance in the process of hoist, and may not be swinging in the air, spinning.
Installation box or module should take put down gently, it is forbidden to throw.
8, LED display products such as the need for regulation, use the soft rubber hammer hit the body metal parts, it is strictly prohibited to hit the module.
It is forbidden to appear between modules of extrusion, collision, etc.
Gap, locating exceptions, and so on and so forth, it is forbidden to use a hammer and other rigid thing. no box and module, may pick up the box body to exclude foreign body after trying again