Graphic | the most common form of indoor and outdoor LED display installation - Full color LED screen - knowledge

LED display installation installation method is divided into indoor and outdoor installation. The installation of the LED display is designed according to the work site and shi, but overall, the most commonly used has the following several kinds of installation method: mount, frame outfit, outfit, ground support installation, pillar, Mosaic and roof type, etc. Outdoor installation time to draw the construction drawing or LED display steel structure. 1. Outdoor displays the installation of outdoor LED display area is larger, the steel structure design basis to consider, wind load and earthquake magnitude, waterproof, dustproof, environmental temperature, lightning protection, and many other factors. Placed inside the steel structure to power distribution cabinet, air conditioning, axial flow fan, lighting and other auxiliary equipment have. , maintenance facilities such as gym. The outdoor screen structure to conform to the following IP65 protection class. 1) Ground support type 2) Column will be outdoor screen is installed on the platform or on the post. Column is divided into column and double column, in addition to the need to make the screen body steel structure, still need to make concrete or steel columns, mainly considering the geological condition. Column installation LED display is usually used for publicity by schools, hospitals, public institution, notifications, etc. 3) Mosaic inlay is a hole in the wall mounted structure, will display screen set in them, for the hole size and screen frame size is consistent, and make the appropriate to decorate, for ease of maintenance of a hole in the wall must be well versed in, otherwise you need to remove the body before using. 4) Roof type 2. The installation of indoor display mode 1) Mount - — Stick a wall applies to 10 square meters below the display screen, screen's total weight is less than 50 kg of display screen, can be directly on the main wall, do not need to leave space of maintenance. Wall requirement is solid wall or hanging concrete beam. Hollow brick or simple file are not this installation method. Rotating bracket mounting: apply to weight more than 50 kg, screen body height and width of not less than 1200 mm screen, must be installed on the main wall, because of its general area is larger, tear open outfit is difficult, so through the screen body repair the space. 2) Frame screen applies to more than 10 square metre, and easy maintenance. Other specific requirements as well as post wall. 3) Less lifting of outdoor display screen is used for lifting, the most common of which are used to store the door lintel display screen. Apply to 10 square meters below the display screen, the installation must be suitable for installation location, such as beams or columns above. Usually need to add back cover and screen. Indoor bearing concrete roof can use standard hanging pieces, boom length depending on site conditions. Indoor steel beams using wire rope hoisting, coat and screen the same color steel decoration. 4) Bridge pack pack can be divided into: mobile buildings: refers to mount processed separately. Placed on the ground, can be moved. Stationary seat zhuang: refers to mount the fixed mount is connected to ground or metope. To create every exciting scene